ATTITUDE LIMITED 3
Pickups and Electronics
Billy’s signature sound comes from a custom woofer pickup developed by YGD (Yamaha Guitar Development). Combining its heavy, powerful low-end and solid fundamental with a DiMarzio designed pickup at the bridge position delivers an incredible tonal range and a strong presence within the band. While stereo output jacks provide separate outputs for the front and rear pickups, mono output is also available. A high cut switch in the front pickup tone control boosts bass output from the front pickup.
Miter Bolting Neck Joint
Miter bolting holds the neck closer and tighter to the body fusing these two separate components into one. Compared to a conventional bolt-on joint, miter bolting efficiently transfers string vibration throughout the body with little loss. This delivers greater body resonance making each note come alive.
Spline Joint
This body structure makes Attitude LTDIII far more resonant than conventional 2 or 3-piece body instruments. Vibrations are transferred easily through the body for an immense, vibrant and loud tone that is unmistakably Attitude.
ATTITUDE LTDIII Neck
A big, thick neck features jumbo frets from frets 1-16 to produce outstanding sustain. The neck is held to the bass body with 4 screws to create a solid bond and tone. The neck also features scallops from frets 17 through 21 and a slap cut ground into the neck that provides greater string access.
ATTITUDE LTDIII Bridge
The solid brass bridge captures and transmits string vibration directly to the body, creating great low-end tone and attack.
Hipshot "D" Tuner
The Hipshot tuner drops the "E" string down a whole step to "D" with the flick is a lever. A gear adjustment provides precision tuning.
Potméterek
1. Front Volume
2. Front Tone (Front P.U. Hi-Cut Switch)
3. Rear Volume (Stereo/Mono Switch)
A.R.E / Acoustic Resonance Enhancement
A.R.E. (Acoustic Resonance Enhancement) is an original wood reforming technology developed by Yamaha. Through precise controll of temperature, humidity, and atmospheric pressure, the molecular properties of the wood can be manipulated into a more acoustically ideal condition, similar to the molecular characteristics of woods in instruments that have been played for years.
I.R.A. / Initial Response Acceleration
If you've ever played another guitarist's instrument and not been able to get the same sound, it's probably because you are playing a different style than what the guitar is used to. After playing the same guitar for years, the guitar adapts to the guitarist's playing style. It takes time for a new guitar to adapt to your own way of playing. Stress found between parts like finish, woods, body, neck, fingerboard, nut, bridge, etc., must be released before all of the parts can resonate together as an instrument. It takes time and a lot of playing for this to happen.Using IRA technology, stresses like those between the finish and wood are release by applying specific vibrations to the completed guitars. Once this treatment is complete, the guitar responds accurately to the guitarist's performance, and produces sound more easily. It also shortens the time needed for the guitar to adapt to your playing style. And it delivers excellent sustain.
