1. Home
  2. Termékek
  3. Professzionális audió
  4. Keverők
  5. MG sorozat
  6. Specifikációk

MG sorozat

MG Series (XU/X Model)
MG20XU
MG16XU
MG16X
MG12XU
MG12XUK
MG12X
MG10XU
MG10XUF
MG10X
MG06X
Mixing capability On-board processors SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) SPX algorithm: 6 programs
I/O Phantom power +48 V +48 V +48 V +48 V +48 V +48 V +48 V +48 V +48 V +48 V
Digital I/O USB Audio Class 2.0 compliant Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit - USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit - USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit - -
Input Channels Mono[MIC/LINE] 12 8 8 4 6 4 4 4 4 2
Mono/Stereo[MIC/LINE] 4 2 2 2 - 2 - - - -
Stereo[LINE] - 2 2 2 3 2 3 3 3 2
Output Channels STEREO OUT 2 2 2 2 2 2 2 2 2 2
MONITOR OUT 1 1 1 1 1 1 1 1 1 -
PHONES 1 1 1 1 1 1 1 1 1 1
AUX SEND 4 4 4 2 1 2 1 1 1 -
GROUP OUT 4 4 4 2 - 2 - - - -
Bus Stereo: 1, GROUP: 4, AUX: 4 (incl. FX) Stereo: 1, GROUP: 4, AUX: 4 (incl. FX) Stereo: 1, GROUP: 4, AUX: 4 (incl. FX) Stereo: 1, GROUP: 2, AUX: 2 (incl. FX) Stereo: 1, AUX[FX]: 1 Stereo: 1, GROUP: 2, AUX: 2 (incl. FX) Stereo: 1, AUX[FX]: 1 Stereo: 1, AUX[FX]: 1 Stereo: 1, AUX[FX]: 1 Stereo: 1
Input Channel Function PAD 26 dB (Mono) 26 dB (Mono) 26 dB (Mono) 26 dB (Mono) 26 dB (Mono) 26 dB (Mono) 26 dB (Mono) 26 dB (Mono) 26 dB (Mono) 26 dB (Mono)
HPF 80 Hz, 12 dB/oct (Mono/Stereo: MIC only) 80 Hz, 12 dB/oct (Mono/Stereo: MIC only) 80 Hz, 12 dB/oct (Mono/Stereo: MIC only) 80 Hz, 12 dB/oct (Mono/Stereo: MIC only) 80 Hz, 12 dB/oct (Mono) 80 Hz, 12 dB/oct (Mono/Stereo: MIC only) 80 Hz, 12 dB/oct (Mono) 80 Hz, 12 dB/oct (Mono) 80 Hz, 12 dB/oct (Mono) 80 Hz, 12 dB/oct (Mono)
COMP 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec -
EQ HIGH Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving (Mono) Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ MID Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking, Stereo 2.5 kHz peaking Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking, Stereo 2.5 kHz peaking Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking, Stereo 2.5 kHz peaking Gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking Gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking -
EQ LOW Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving (Mono) Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED LED turns on when post EQ signal reaches 3 dB below clipping LED turns on when post EQ signal reaches 3 dB below clipping LED turns on when post EQ signal reaches 3 dB below clipping LED turns on when post EQ signal reaches 3 dB below clipping LED turns on when post EQ signal reaches 3 dB below clipping LED turns on when post EQ signal reaches 3 dB below clipping LED turns on when post EQ signal reaches 3 dB below clipping LED turns on when post EQ signal reaches 3 dB below clipping LED turns on when post EQ signal reaches 3 dB below clipping LED turns on when post EQ signal reaches 3 dB below clipping
Level Meter 2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB] 2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB] 2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB] 2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB] 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB] 2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB] 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB] 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB] 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB] 2 x 7 -segment LED meter [PEAK, +6, +3, 0, -3, -10, -20 dB]
Total harmonic distortion 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min 0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min 0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min 0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min 0.01 % @ +8dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +18dBu (1kHz), GAIN knob: Min
Frequency response +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min +0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min +0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min +0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min +0.5 dB/-0.5 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Hum & noise level Equivalent input noise -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
Residual output noise -102 dBu (STEREO OUT, STEREO master fader: Min) -102 dBu (STEREO OUT, STEREO master fader: Min) -102 dBu (STEREO OUT, STEREO master fader: Min) -102 dBu (STEREO OUT, STEREO master fader: Min) -102 dBu (STEREO OUT, STEREO LEVEL knob: Min) -102 dBu (STEREO OUT, STEREO master fader: Min) -102 dBu (STEREO OUT, STEREO LEVEL knob: Min) -102 dBu (STEREO OUT, STEREO master fader: Min) -102 dBu (STEREO OUT, STEREO LEVEL knob: Min) -102 dBu (STEREO OUT, STEREO LEVEL knob: Min)
Crosstalk -78 dB -78 dB -78 dB -78 dB -83 dB -78 dB -83 dB -83 dB -83 dB -88 dB
Power requirements AC 100 – 240 V, 50 / 60 Hz AC 100 – 240 V, 50 / 60 Hz AC 100 – 240 V, 50 / 60 Hz AC 100 – 240 V, 50 / 60 Hz PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha AC 100 – 240 V, 50 / 60 Hz PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha PA-130 (DC12 V/1.0 A, Cable length = 1.8 m), 120 V, 60 Hz, MU18 (DC12 V/1.5 A, Cable length = 1.5 m), 100 V-240 V, 50 Hz/60 Hz or equivalent recommended by Yamaha
Power consumption 36 W 30 W 30 W 22 W 22.9 W 22 W 22.9 W 22.9 W 22.9 W 12 W
Dimensions W 444 mm (17.5") 444 mm (17.5") 444 mm (17.5") 308 mm (12.1") 315 mm (12.4") 308 mm (12.1") 244 mm (9.6") 275 mm (10.8") 244 mm (9.6") 149 mm (5.9")
H 130 mm (5.1") 130 mm (5.1") 130 mm (5.1") 118 mm (4.6") 91 mm (3.6") 118 mm (4.6") 71 mm (2.8") 110 mm (4.3") 71 mm (2.8") 62 mm (2.4")
D 500mm (19.7") 500 mm (19.7") 500 mm (19.7") 422 mm (16.6") 297mm (11.7") 422 mm (16.6") 294 mm (11.6") 390 mm (15.4") 294 mm (11.6") 202 mm (7.9")
Net weight 7.1kg (15.7 lbs.) 6.8 kg (15.0 lbs.) 6.8 kg (15.0 lbs.) 4.2 kg (9.3 lbs.) 3.0kg(6.62 lbs) 4.2 kg (9.3 lbs.) 2.1 kg (4.63 lbs.) 3.3 kg (7.3 lbs) 2.1 kg (4.63 lbs.) 0.9 kg (1.98 lbs.)
Accessories Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Cubase AI Download Information, Rack-mount kit, Optional Accessory: Foot Switch FC5 Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Cubase AI Download Information, Rack-mount kit, Optional Accessory: Foot Switch FC5 Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Rack-mount kit, Optional Accessory: Foot Switch FC5 Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Cubase AI Download Information, Optional Accessory: Rack-mount kit RK-MG12, Foot Switch FC5 Included Accessory: AC Adaptor, Owner’s Manual, Cubase AI Download Information, Technical Specifications, Optional Accessory: Foot Switch FC5 Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Optional Accessory: Rack-mount kit RK-MG12, Foot Switch FC5 Included Accessory: AC Adaptor, Owner’s Manual, Cubase AI Download Information, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A, Foot Switch FC5 Included Accessory: AC Adaptor, Owner’s Manual, Cubase AI Download Information, Technical Specifications, Optional Accessory: Foot Switch FC5 Included Accessory: AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A, Foot Switch FC5 Included Accessory: AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A
Other Operating Temperature: 0 to +40˚C Operating Temperature: 0 to +40˚C Operating Temperature: 0 to +40˚C Operating Temperature: 0 to +40˚C Operating Temperature: 0 to +40˚C Operating Temperature: 0 to +40˚C Operating Temperature: 0 to +40˚C Operating Temperature: 0 to +40˚C Operating Temperature: 0 to +40˚C Operating Temperature: 0 to +40˚C
  • 0 dBu = 0.775 Vrms Output impedance of signal generator (Rs) = 150Ω
    All level controls are nominal if not specified.
    Hum & noise level: Noise is measured with A-weighting filter.
    Crosstalk： Measured with 1 kHz band pass filter.

MG Series (Standard Model)
MG20
MG16
MG12
MG10
MG06
I/O Phantom power +48V +48 V +48 V +48 V +48 V
Input Channels Mono[MIC/LINE] 12 8 4 4 2
Mono/Stereo[MIC/LINE] 4 2 2 - -
Stereo[LINE] - 2 2 3 2
Output Channels STEREO OUT 2 2 2 2 2
MONITOR OUT 1 1 1 1 -
PHONES 1 1 1 1 1
AUX SEND 4 4 2 1 -
GROUP OUT 4 4 2 - -
Bus Stereo: 1, GROUP: 4, AUX: 4 Stereo: 1, GROUP: 4, AUX: 4 Stereo: 1, GROUP: 2, AUX: 2 Stereo: 1, AUX: 1 Stereo: 1
Input Channel Function PAD 26 dB(Mono) 26 dB (Mono) 26 dB (Mono) 26 dB (Mono) 26 dB (Mono)
HPF 80 Hz, 12 dB/oct (Mono/Stereo: MIC only) 80 Hz, 12 dB/oct (Mono/Stereo: MIC only) 80 Hz, 12 dB/oct (Mono/Stereo: MIC only) 80 Hz, 12 dB/oct (Mono) 80 Hz, 12 dB/oct (Mono)
COMP 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec -
EQ HIGH Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving (Mono) Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ MID Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking, Stereo 2.5 kHz peaking Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking Gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking -
EQ LOW Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving (Mono) Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED LED turns on when post EQ signal reaches 3 dB below clipping(Mono) LED turns on when post EQ signal reaches 3 dB below clipping LED turns on when post EQ signal reaches 3 dB below clipping LED turns on when post EQ signal reaches 3 dB below clipping LED turns on when post EQ signal reaches 3 dB below clipping
Level Meter 2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB] - 2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB] 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB] 2 x 7 -segment LED meter [PEAK, +6, +3, 0, -3, -10, -20 dB]
Total harmonic distortion 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min 0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min 0.01 % @ +8dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +18dBu (1kHz), GAIN knob: Min
Frequency response +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min +0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min +0.5 dB/-0.5 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Hum & noise level Equivalent input noise -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
Residual output noise -102 dBu (STEREO OUT, STEREO master fader: Min) -102 dBu (STEREO OUT, STEREO master fader: Min) -102 dBu (STEREO OUT, STEREO master fader: Min) -102 dBu (STEREO OUT, STEREO LEVEL knob: Min) -102 dBu (STEREO OUT, STEREO LEVEL knob: Min)
Crosstalk -78 dB -78 dB -78 dB -83 dB -88 dB
Power requirements AC 100 – 240 V, 50 / 60 Hz AC 100 – 240 V, 50 / 60 Hz AC 100 – 240 V, 50 / 60 Hz PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha PA-130 (DC12 V/1.0 A, Cable length = 1.8 m), 120 V, 60 Hz, MU18 (DC12 V/1.5 A, Cable length = 1.5 m), 100 V-240 V, 50 Hz/60 Hz or equivalent recommended by Yamaha
Power consumption 36 W 30 W 22 W 22.9 W 12 W
Dimensions W 444 mm (17.5") 444 mm (17.5") 308 mm (12.1") 244 mm (9.6") 149 mm (5.9")
H 130 mm (5.1") 130 mm (5.1") 118 mm (4.6") 71 mm (2.8") 62 mm (2.4")
D 500 mm (19.7") 500 mm (19.7") 422 mm (16.6") 294 mm (11.6") 202 mm (7.9")
Net weight 6.9kg (15.2 lbs.) 6.6 kg (14.6 lbs.) 4.0 kg (8.8 lbs.) 1.9 kg (4.19 lbs.) 0.9 kg (1.98 lbs.)
Accessories Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Rack-mount kit Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Rack-mount kit Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Optional Accessory: Rack-mount kit RK-MG12 Included Accessory: AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A Included Accessory: AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A
Other Operating Temperature: 0 to +40˚C Operating Temperature: 0 to +40˚C Operating Temperature: 0 to +40˚C Operating Temperature: 0 to +40˚C Operating Temperature: 0 to +40˚C
  • 0 dBu = 0.775 Vrms Output impedance of signal generator (Rs) = 150Ω
    All level controls are nominal if not specified.
    Hum & noise level: Noise is measured with A-weighting filter.
    Crosstalk： Measured with 1 kHz band pass filter.

MG20XU/20 Analog Input Characteristics

Input Terminals PAD 26 dB GAIN Trim Position Actual Load Impedance For Use With Nominal Input Level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE
1 – 12		 OFF +64 dB 3kΩ 50-600Ω
Mics/Lines		 -80 dBu
(0.077 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 Combo
jack *2
(Balanced)
+20 dB -36 dBu
(12. 3 mV)		 -16 dBu
(122.8 mV)		 +4 dBu
(1.228 V)
ON +38 dB -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
MIC
13/14 –
19/20		 - +64 dB 3kΩ 50-600Ω
Mic		 -80 dBu
(0.077 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 XLR-3-31 *3
(Balanced)
+20 dB -36 dBu
(12. 3 mV)		 -16 dBu
(122.8 mV)		 -6 dBu
(388.2mV)
LINE
13/14 –
15/16		 - +38 dB 10kΩ 600Ω
Lines		 -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)		 Phone jack *5
(Unbalanced)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
LINE
17/18 –
19/20		 - +38 dB 10kΩ 600Ω
Lines		 -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)		 RCA Pin
(Unbalanced)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)

MG20XU/20 Analog Output Characteristics

Output Terminals Actual Source
Impedance		 For Use With Nominal Output Level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 600Ω Lines +4 dBu
(1.228 V)		 +24 dBu
(12.28 V)		 XLR-3-32 *3
Phone jack *4
(Balanced)
MONITOR OUT [L, R]
GROUP OUT [1 - 4]
AUX SEND [1 - 4]		 150Ω 10kΩ Lines +4 dBu
(1.228 V)		 +20 dBu
(7.750 V)		 Phone jack *4
(Impedance Balanced)
PHONES 110Ω 40Ω Phones 3mW + 3mW 100mW + 100mW Stereo phone jack

MG16XU/16X/16 Analog Input Characteristics

Input Terminals PAD 26 dB GAIN Trim Position Actual Load Impedance For Use With Nominal Input Level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE
1 – 8		 OFF +64 dB 3kΩ 50-600Ω
Mics/Lines		 -80 dBu
(0.077 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 Combo
jack *2
(Balanced)
+20 dB -36 dBu
(12. 3 mV)		 -16 dBu
(122.8 mV)		 +4 dBu
(1.228 V)
ON +38 dB -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
MIC
9/10,
11/12		 - +64 dB 3kΩ 50-600Ω
Mic		 -80 dBu
(0.077 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 XLR-3-31 *3
(Balanced)
+20 dB -36 dBu
(12. 3 mV)		 -16 dBu
(122.8 mV)		 -6 dBu
(388.2mV)
LINE
9/10,
11/12		 - +38 dB 10kΩ 600Ω
Lines		 -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)		 Phone jack *5
(Unbalanced)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
LINE
13/14 –
15/16		 - - 10kΩ 600Ω
Lines		 -30 dBu
(24.5 mV)		 -10 dBu
(245 mV)		 +10 dBu
(2.45 V)		 Phone jack *5
RCA Pin
(Unbalanced)

MG16XU/16X/16 Analog Output Characteristics

Output Terminals Actual Source
Impedance		 For Use With Nominal Output Level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 600Ω Lines +4 dBu
(1.228 V)		 +24 dBu
(12.28 V)		 XLR-3-32 *3
Phone jack *4
(Balanced)
MONITOR OUT [L, R]
GROUP OUT [1 - 4]
AUX SEND [1 - 4]		 150Ω 10kΩ Lines +4 dBu
(1.228 V)		 +20 dBu
(7.750 V)		 Phone jack *4
(Impedance Balanced)
PHONES 110Ω 40Ω Phones 3mW + 3mW 100mW + 100mW Stereo phone jack

MG12XU/12X/12 Analog Input Characteristics

Input Terminals PAD 26 dB GAIN Trim Position Actual Load Impedance For Use With Nominal Input Level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE
1 – 4		 OFF +64 dB 3kΩ 50-600Ω
Mics/Lines		 -80 dBu
(0.077 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 Combo
jack *2
(Balanced)
+20 dB -36 dBu
(12. 3 mV)		 -16 dBu
(122.8 mV)		 +4 dBu
(1.228 V)
ON +38 dB -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
MIC
5/6, 7/8		 - +64 dB 3kΩ 50-600Ω
Mic		 -80 dBu
(0.077 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 XLR-3-31 *3
(Balanced)
+20 dB -36 dBu
(12.3 mV)		 -16 dBu
(122.8 mV)		 -6 dBu
(388.2 mV)
LINE
5/6, 7/8		 - +38 dB 10kΩ 600Ω
Lines		 -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)		 Phone jack *5
(Unbalanced)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
LINE
9/10		 - - 10kΩ 600Ω
Lines		 -30 dBu
(24.5 mV)		 -10 dBu
(245 mV)		 +10 dBu
(2.45 V)		 Phone jack *5
RCA Pin
(Unbalanced)

MG12XU/12X/12 Analog Output Characteristics

Output Terminals Actual Source
Impedance		 For Use With Nominal Output Level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 600Ω Lines +4 dBu
(1.228 V)		 +24 dBu
(12.28 V)		 XLR-3-32 *3
Phone jack *4
(Balanced)
MONITOR OUT [L, R]
GROUP OUT [1, 2]
AUX SEND [1, 2]		 150Ω 10kΩ Lines +4 dBu
(1.228 V)		 +20 dBu
(7.750 V)		 Phone jack *4
(Impedance Balanced)
PHONES 110Ω 40Ω Phones 3mW + 3mW 100mW + 100mW Stereo phone jack

MG12XUK Analog Input Characteristics

Input Jacks PAD 26 dB GAIN Trim Position Actual Load Impedance For Use With Nominal Input Level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE
1 – 6		 OFF +64 dB 3kΩ 50-600Ω
Mics/Lines		 -72 dBu
(0.195 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 Combo
jack *2
(Balanced)
+20 dB -28 dBu
(30.9 mV)		 -16 dBu
(122.8 mV)		 +4 dBu
(1.228 V)
ON +38 dB -46 dBu
(3.884 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)
-6 dB -2 dBu
(615.6 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
LINE
7/8, 9/10		 - - 10kΩ 600Ω Lines -22 dBu
(61.56 mV)		 -10 dBu
(245.1 mV)		 +10 dBu
(2.451 V)		 Phone jack *5
RCA Pin
(Unbalanced)
LINE
11/12		 Phone jack *5
(Unbalanced)

MG12XUK Analog Output Characteristics

Output Terminals Actual Source
Impedance		 For Use With Nominal Output Level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 600Ω Lines +4 dBu
(1.228 V)		 +24 dBu
(12.28 V)		 XLR-3-32 *3
Phone jack *4
(Balanced)
MONITOR OUT [L, R]
FX SEND		 150Ω 10kΩ Lines +4 dBu
(1.228 V)		 +20 dBu
(7.750 V)		 Phone jack *4
(Impedance Balanced)
PHONES 110Ω 40Ω Phones 3 mW + 3 mW 100 mW + 100 mW Stereo phone jack

MG10XU/10X/10 Analog Input Characteristics

Input Terminals PAD 26 dB GAIN Trim Position Actual Load Impedance For Use With Nominal Input Level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE
1 – 4		 OFF +64 dB 3kΩ 50-600Ω
Mics/Lines		 -72 dBu
(0.195 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 Combo
jack *2
(Balanced)
+20 dB -28 dBu
(30.9 mV)		 -16 dBu
(122.8 mV)		 +4 dBu
(1.228 V)
ON +38 dB -46 dBu
(3.884 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)
-6 dB -2 dBu
(615.6 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
LINE
5/6, 7/8		 - - 10kΩ 600Ω
Lines		 -22 dBu
(61.56 mV)		 -10 dBu
(245.1 mV)		 +10 dBu
(2.451 V)		 Phone jack *5
RCA Pin
(Unbalanced)
LINE 9/10 Phone jack *5
(Unbalanced)

MG10XU/10X/10 Analog Output Characteristics

Output Terminals Actual Source
Impedance		 For Use With Nominal Output Level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 600Ω Lines +4 dBu
(1.228 V)		 +24 dBu
(12.28 V)		 XLR-3-32 *3
Phone jack *4
(Balanced)
MONITOR OUT [L, R]
AUX[FX] SEND		 150Ω 10kΩ Lines +4 dBu
(1.228 V)		 +20 dBu
(7.750 V)		 Phone jack *4
(Impedance Balanced)
PHONES 110Ω 40Ω Phones 3mW + 3mW 100mW + 100mW Stereo phone jack

MG10XUF Analog Input Characteristics

Input Jacks PAD 26 dB GAIN Trim Position Actual Load Impedance For Use With Nominal Input Level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE
1 – 4		 OFF +64 dB 3kΩ 50-600Ω
Mics/Lines		 -80 dBu
(0.077 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 Combo
jack *2
(Balanced)
+20 dB -36 dBu
(12.3 mV)		 -16 dBu
(122.8 mV)		 +4 dBu
(1.228 V)
ON +38 dB -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
LINE
5/6, 7/8		 - - 10kΩ 600Ω Lines -30 dBu
(24.5 mV)		 -10 dBu
(245 mV)		 +10 dBu
(2.45 V)		 Phone jack *5
RCA Pin
(Unbalanced)
LINE
9/10		 Phone jack *5
(Unbalanced)

MG10XUF Analog Output Characteristics

Output Terminals Actual Source
Impedance		 For Use With Nominal Output Level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 600Ω Lines +4 dBu
(1.228 V)		 +24 dBu
(12.28 V)		 XLR-3-32 *3
Phone jack *4
(Balanced)
MONITOR OUT [L, R]
FX SEND		 150Ω 10kΩ Lines +4 dBu
(1.228 V)		 +20 dBu
(7.750 V)		 Phone jack *4
(Impedance Balanced)
PHONES 110Ω 40Ω Phones 3 mW + 3 mW 100 mW + 100 mW Stereo phone jack

MG06X/06 Analog Input Characteristics

Input Terminals PAD 26 dB GAIN Trim Position Actual Load Impedance For Use With Nominal Input Level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE
1/L, 2/R		 OFF +64 dB 3kΩ 50-600Ω
Mics/Lines		 -72 dBu
(0.195 mV)		 -60 dBu
(0.775 mV)		 -46 dBu
(3.884 mV)		 Combo
jack *2
(Balanced)
+20 dB -28 dBu
(30.9 mV)		 -16 dBu
(122.8 mV)		 -2 dBu
(615.6 mV)
ON +38 dB -46 dBu
(3.884 mV)		 -34 dBu
(15.46 mV)		 -20 dBu
(77.5 mV)
-6 dB -2 dBu
(615.6 mV)		 +10 dBu
(2.451 V)		 +24 dBu
(12.283 V)
LINE
3/4, 5/6		 - - 10kΩ 600Ω
Lines		 -22 dBu
(61.56 mV)		 -10 dBu
(245.1 mV)		 +4 dBu
(1.228 V)		 Phone jack *5
RCA Pin
(Unbalanced)

MG06X/06 Analog Output Characteristics

Output Terminals Actual Source
Impedance		 For Use With Nominal Output Level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 10kΩ Lines +4 dBu
(1.228 V)		 +18 dBu
(6.156 V)		 XLR-3-32 *3
Phone jack *4
(Balanced)
PHONES 33Ω 40Ω Phones 2.4mW + 2.4mW 24mW + 24mW Stereo phone jack

Digital Input / Output Characteristics (XU Models)

Output Terminals Format Data Length Fs Connector
USB USB Audio Class 2.0 16 / 24bit 44.1 kHz, 48 kHz, 88.2 kHz,
96 kHz, 176.4kHz, 192 kHz		 USB Standard-B

0dBu is referenced to 0.775Vrms.
*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.228V) or the nominal output level when the unit is set to maximum gain. (All level controls are maximum position.)
*2. 1&Sleeve = GND, 2&Tip = HOT, 3&Ring = COLD
*3. 1 = GND, 2 = HOT, 3 = COLD
*4. Tip = HOT, Ring = COLD, Sleeve = GND
*5. Tip = Signal, Sleeve = GND

MG20 Analog Input Characteristics

Input Terminals PAD 26 dB GAIN Trim Position Actual Load Impedance For Use With Nominal Input Level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE
1 – 12		 OFF +64 dB 3kΩ 50-600Ω
Mics/Lines		 -80 dBu
(0.077 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 Combo
jack *2
(Balanced)
+20 dB -36 dBu
(12. 3 mV)		 -16 dBu
(122.8 mV)		 +4 dBu
(1.228 V)
ON +38 dB -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
MIC
13/14 –
19/20		 - +64 dB 3kΩ 50-600Ω
Mic		 -80 dBu
(0.077 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 XLR-3-31 *3
(Balanced)
+20 dB -36 dBu
(12. 3 mV)		 -16 dBu
(122.8 mV)		 -6 dBu
(388.2mV)
LINE
13/14 –
15/16		 - +38 dB 10kΩ 600Ω
Lines		 -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)		 Phone jack *5
(Unbalanced)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
LINE
17/18 –
19/20		 - +38 dB 10kΩ 600Ω
Lines		 -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)		 RCA Pin
(Unbalanced)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)

MG20 Analog Output Characteristics

Output Terminals Actual Source
Impedance		 For Use With Nominal Output Level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 600Ω Lines +4 dBu
(1.228 V)		 +24 dBu
(12.28 V)		 XLR-3-32 *3
Phone jack *4
(Balanced)
MONITOR OUT [L, R]
GROUP OUT [1 - 4]
AUX SEND [1 - 4]		 150Ω 10kΩ Lines +4 dBu
(1.228 V)		 +20 dBu
(7.750 V)		 Phone jack *4
(Impedance Balanced)
PHONES 110Ω 40Ω Phones 3mW + 3mW 100mW + 100mW Stereo phone jack

MG16 Analog Input Characteristics

Input Terminals PAD 26 dB GAIN Trim Position Actual Load Impedance For Use With Nominal Input Level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE
1 – 8		 OFF +64 dB 3kΩ 50-600Ω
Mics/Lines		 -80 dBu
(0.077 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 Combo
jack *2
(Balanced)
+20 dB -36 dBu
(12. 3 mV)		 -16 dBu
(122.8 mV)		 +4 dBu
(1.228 V)
ON +38 dB -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
MIC
9/10,
11/12		 - +64 dB 3kΩ 50-600Ω
Mic		 -80 dBu
(0.077 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 XLR-3-31 *3
(Balanced)
+20 dB -36 dBu
(12. 3 mV)		 -16 dBu
(122.8 mV)		 -6 dBu
(388.2mV)
LINE
9/10,
11/12		 - +38 dB 10kΩ 600Ω
Lines		 -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)		 Phone jack *5
(Unbalanced)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
LINE
13/14 –
15/16		 - - 10kΩ 600Ω
Lines		 -30 dBu
(24.5 mV)		 -10 dBu
(245 mV)		 +10 dBu
(2.45 V)		 Phone jack *5
RCA Pin
(Unbalanced)

MG16 Analog Output Characteristics

Output Terminals Actual Source
Impedance		 For Use With Nominal Output Level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 600Ω Lines +4 dBu
(1.228 V)		 +24 dBu
(12.28 V)		 XLR-3-32 *3
Phone jack *4
(Balanced)
MONITOR OUT [L, R]
GROUP OUT [1 - 4]
AUX SEND [1 - 4]		 150Ω 10kΩ Lines +4 dBu
(1.228 V)		 +20 dBu
(7.750 V)		 Phone jack *4
(Impedance Balanced)
PHONES 110Ω 40Ω Phones 3mW + 3mW 100mW + 100mW Stereo phone jack

MG12 Analog Input Characteristics

Input Terminals PAD 26 dB GAIN Trim Position Actual Load Impedance For Use With Nominal Input Level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE
1 – 4		 OFF +64 dB 3kΩ 50-600Ω
Mics/Lines		 -80 dBu
(0.077 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 Combo
jack *2
(Balanced)
+20 dB -36 dBu
(12. 3 mV)		 -16 dBu
(122.8 mV)		 +4 dBu
(1.228 V)
ON +38 dB -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
MIC
5/6, 7/8		 - +64 dB 3kΩ 50-600Ω
Mic		 -80 dBu
(0.077 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 XLR-3-31 *3
(Balanced)
+20 dB -36 dBu
(12.3 mV)		 -16 dBu
(122.8 mV)		 -6 dBu
(388.2 mV)
LINE
5/6, 7/8		 - +38 dB 10kΩ 600Ω
Lines		 -54 dBu
(1.55 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)		 Phone jack *5
(Unbalanced)
-6 dB -10 dBu
(245 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
LINE
9/10		 - - 10kΩ 600Ω
Lines		 -30 dBu
(24.5 mV)		 -10 dBu
(245 mV)		 +10 dBu
(2.45 V)		 Phone jack *5
RCA Pin
(Unbalanced)

MG12 Analog Output Characteristics

Output Terminals Actual Source
Impedance		 For Use With Nominal Output Level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 600Ω Lines +4 dBu
(1.228 V)		 +24 dBu
(12.28 V)		 XLR-3-32 *3
Phone jack *4
(Balanced)
MONITOR OUT [L, R]
GROUP OUT [1, 2]
AUX SEND [1, 2]		 150Ω 10kΩ Lines +4 dBu
(1.228 V)		 +20 dBu
(7.750 V)		 Phone jack *4
(Impedance Balanced)
PHONES 110Ω 40Ω Phones 3mW + 3mW 100mW + 100mW Stereo phone jack

MG10 Analog Input Characteristics

Input Terminals PAD 26 dB GAIN Trim Position Actual Load Impedance For Use With Nominal Input Level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE
1 – 4		 OFF +64 dB 3kΩ 50-600Ω
Mics/Lines		 -72 dBu
(0.195 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 Combo
jack *2
(Balanced)
+20 dB -28 dBu
(30.9 mV)		 -16 dBu
(122.8 mV)		 +4 dBu
(1.228 V)
ON +38 dB -46 dBu
(3.884 mV)		 -34 dBu
(15.46 mV)		 -14 dBu
(154.6 mV)
-6 dB -2 dBu
(615.6 mV)		 +10 dBu
(2.451 V)		 +30 dBu
(24.51 V)
LINE
5/6, 7/8		 - - 10kΩ 600Ω
Lines		 -22 dBu
(61.56 mV)		 -10 dBu
(245.1 mV)		 +10 dBu
(2.451 V)		 Phone jack *5
RCA Pin
(Unbalanced)
LINE 9/10 Phone jack *5
(Unbalanced)

MG10 Analog Output Characteristics

Output Terminals Actual Source
Impedance		 For Use With Nominal Output Level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 600Ω Lines
+20 dB		 +4 dBu
(1.228 V)		 +24 dBu
(12.28 V)		 XLR-3-32 *3
Phone jack *4
(Balanced)
MONITOR OUT [L, R]
AUX SEND		 150Ω 10kΩ Lines +4 dBu
(1.228 V)		 +20 dBu
(7.750 V)		 Phone jack *4
(Impedance Balanced)
PHONES 110Ω 40Ω Phones 3mW + 3mW 100mW + 100mW Stereo phone jack

MG06 Analog Input Characteristics

Input Terminals PAD 26 dB GAIN Trim Position Actual Load Impedance For Use With Nominal Input Level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE
1/L, 2/R		 OFF +64 dB 3kΩ 50-600Ω
Mics/Lines		 -72 dBu
(0.195 mV)		 -60 dBu
(0.775 mV)		 -46 dBu
(3.884 mV)		 Combo
jack *2
(Balanced)
+20 dB -28 dBu
(30.9 mV)		 -16 dBu
(122.8 mV)		 -2 dBu
(615.6 mV)
ON +38 dB -46 dBu
(3.884 mV)		 -34 dBu
(15.46 mV)		 -20 dBu
(77.5 mV)
-6 dB -2 dBu
(615.6 mV)		 +10 dBu
(2.451 V)		 +24 dBu
(12.283 V)
LINE
3/4, 5/6		 - - 10kΩ 600Ω
Lines		 -22 dBu
(61.56 mV)		 -10 dBu
(245.1 mV)		 +4 dBu
(1.228 V)		 Phone jack *5
(Unbalanced)

MG06 Analog Output Characteristics

Output Terminals Actual Source
Impedance		 For Use With Nominal Output Level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 10kΩ Lines +4 dBu
(1.228 V)		 +18 dBu
(6.156 V)		 XLR-3-32 *3
Phone jack *4
(Balanced)
PHONES 33Ω 40Ω Phones 2.4mW + 2.4mW 24mW + 24mW Stereo phone jack

0dBu is referenced to 0.775Vrms.
*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.228V) or the nominal output level when the unit is set to maximum gain. (All level controls are maximum position.)
*2. 1&Sleeve = GND, 2&Tip = HOT, 3&Ring = COLD
*3. 1 = GND, 2 = HOT, 3 = COLD
*4. Tip = HOT, Ring = COLD, Sleeve = GND
*5. Tip = Signal, Sleeve = GND

Download

Letöltés

News

Hírek, események

Esettanulmányok

Oktatás & Támogatás

Special

Különleges tartalom

Rólunk

  1. Home
  2. Termékek
  3. Professzionális audió
  4. Keverők
  5. MG sorozat
  6. Specifikációk